Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32

Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32,ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32 Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa,6 Version 868/915MH LoRa ESP-32 OLED 0,96 Inch SD Card Bluetooth WiFi Module SMA: Electronics,TTGO ESP32 - Paxcounter LoRa32 V2,1_1,Online Best choice,Shop Now,Free Worldwide Shipping,To provide you with the best trendy products. SD Card Bluetooth WiFi Module SMA TTGO ESP32 Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch carmenbaizanfloristas.com.

Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32

Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32

Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32

TTGO ESP32 - Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA: Electronics. Describe:。 The 868/95MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)。 Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged!。 With IO port touch screen touch signal input, you need to add the 00nF pull-down capacitor to this pin!。 example:。 This product is a SX76 chip based on ESP3 WIFI increased OLED, namely LoRa remote modem, 868-95MHz frequency, high sensitivity is over-48dBm, + 0dBm output power, high reliability, long transmission distance.。 the onboard 3MB Flash wi-fi antenna, 0.96 inch blue oled display, lithium battery charging circuit, CP0 interface and USB serial chip, the perfect support for Arduino development environment, can be used for program checking and product development is very easy and fast.。 Operating voltage: 3.3V to 7V。 Operating temperature range: -40 ° C to + 90 ° C。 Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes。 Data rates: 50 Mbps @ n HT40., 7 Mbps @ n HT0, 54 Mbps @ g, Mbps @ b。 transmit power: 9.5 dBm @ b, 6.5 dBm @ g, 5.5 dBm @ n receiver sensitivity up to -98 dBm。 UDP sustained throughput of 35 Mbps。 。 。 。

Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32
Paxcounter LoRa32 V2.1/_1.6 Version 868//915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32

Paxcounter LoRa32 V2.1_1.6 Version 868/915MH LoRa ESP-32 OLED 0.96 Inch SD Card Bluetooth WiFi Module SMA TTGO ESP32


6 Version 868/915MH LoRa ESP-32 OLED 0,96 Inch SD Card Bluetooth WiFi Module SMA: Electronics,TTGO ESP32 - Paxcounter LoRa32 V2,1_1,Online Best choice,Shop Now,Free Worldwide Shipping,To provide you with the best trendy products. //file end